CZ TSO CZECHMATE 2.0 SCALES UL

RERELEASED 2023, PA12 Ultralight

CZ Scales 2.0 have been on demand for their captivating looks.  Sorry for the delay, was proving out the material with this ultralight design.  These are made in house out of the same durable material of our 1911 Bite/AR/AK grips.

-  They weigh 0.49 ounces without screws

-  Torx Screws Included

 -  Material is Black through out, but are paintable if you so desire.

-  Overall width is based on the very widely used STI 2011 competition grip, width at base 1.330

-  Even sided upper scoop cuts to aid in mag release access, width at the scoop 1.110

-The grip length was set for the CZ factory Czechmate magwell.  This same magwell is used on the Tactial Sport Orange.

-  The unique scale design provides “extra” grip by allowing your hand to flow into the pockets, locking it in.

-  Overall width is based on the very widely used STI 2011 competition grip, width at base 1.330

-  Even sided upper scoop cuts to aid in mag release access, width at the scoop 1.110

Install notes:  Scale grips are produced for a very tight fit.  Clean your frame of any carbon or thread locker build up.  Primarily check that the angled face that locates the front of the grip is clean.  When installing the screw, press the grip forward to ensure screw clearance to the frame. Insert your screws and check that it will thread in.  Do not proceed if the screw isn't a perfect 90 degree angle.  Only when the screw goes in perfectly straight should you proceed with the screw installation.  Please do not cross thread your frame or over tighten the screws.  FYI.... due to manufacturing processes, frames may have the fastener locations in different spots left vs right.  If you are not comfortable slotting the Scale grip screw hole to alow the screw to go in perfectly straight, seek the assistance of a qualified gunsmith.  Check that your screws are tight after and during your next match.  Blue thread locker on your grip screw is recommended. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Shooting Sports Innovations stands behind all of its products.  If you have an issue, let us know.  However, firearms are inherently dangerous and must be treated with respect at all times.  Please make sure you are fully familiar with your firearm, how to use it safely, and that you follow the four rules of firearm safety at all times.  Shooting Sports Innovations cannot and will not be held responsible for any negligent use of any firearm or Shooting Sports Innovations products.