Below are the available bulk discount rates for each individual item when you purchase a certain amount
10-22*2020 *CZ 4.0 now come with black torx screws standard, more colors soon
CZ Scale Grips 4.0 Modular
The SSI Scale Grip line of products continues to evolve.
4.0 GRIPS ARE NOW MODULAR.
9 combinations to tune the recoil arc.
** weight kits sold separately **
|
Option |
Left Grip Weight |
Right Grip Weight |
Total Grip Weight |
|
1 |
— |
— |
2.625 oz |
|
2 |
BRASS |
— |
4.125 oz |
|
3 |
— |
BRASS |
4.125 oz |
|
4 |
BRASS |
BRASS |
5.5 oz |
|
5 |
TUNGSTEN |
— |
5.5 oz |
|
6 |
— |
TUNGSTEN |
5.5 oz |
|
7 |
BRASS |
TUNGSTEN |
7.0 oz |
|
8 |
TUNGSTEN |
BRASS |
7.0 oz |
|
9 |
TUNGSTEN |
TUNGSTEN |
8.5 oz |
**Fits all CZ 75, 75B, SP01, Shadow 1, Shadow 2, SP01 Accu shadow and the Dan Wesson DWX. Other models are compatible, but not confirmed by us.
- The unique micro lug design provides an experience like nothing else. We feel the market has texture that hurts, we designed a texture that works!! The palm of your support hand will feel firmly planted and your fingertips on the strong hand will not be crushed into aggressive spikes.
- Overall width is 1.405 at the base, 1.2 overall width at the upper mag release scoop cut.
- 6061 T6 Aluminum, Available in Raw, Hard Anodized Black and Blue. More colors available soon. Let us know what you want.
- CZ Scale 4.0 grips now come with the Black Torx Screws at no additional charge.
Install notes: Scale grips are produced for a very tight fit. Clean your frame of any carbon or thread locker build up. Primarily check that the angled face that locates the front of the grip is clean. When installing the screw, press the grip forward to ensure screw clearance to the frame. Insert your screws and check that it will thread in. Do not proceed if the screw isn't a perfect 90 degree angle. Only when the screw goes in perfectly straight should you proceed with the screw installation. Please do not cross thread your frame or over tighten the screws. FYI.... due to manufacturing processes, frames may have the fastener locations in different spots left vs right. If you are not comfortable slotting the Scale grip screw hole to allow the screw to go in perfectly straight, seek the assistance of a qualified gunsmith. Check that your screws are tight after and during your next match. Blue thread locker on your grip screw is recommended. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
This is my second set of scales 4.0. I custom fit them on my czechmate along with the tungsten inserts. Grip is fantastic and I love the wider grip. Extra weight makes this open gun eat up the recoil. They are more than worth the time I put into cutting them to fit the czechmate grips.
I have long been a fan of my scales 2.0 grips and the same follows with the new 4.0. The traction on these is fantastic without being overly aggressive. The fit and finish is spot on and really enhance your look with the multiple colors available. I have the tungsten inserts in mine and the balance of my czechmate is right where I wanted it to be. Even though I had to do a little fitment for my gun with the magwell the time spent is more than worth it.
